​
What is Quick Rental?

Quickly lease resources for TRON network addresses, with immediate usage upon rental, leased on demand. Suitable for temporary, occasional operations such as low-frequency user transfers, DApp operations, etc.

​
What Scenarios is Quick Rental Suitable For?

Quick Rental is suitable for temporary, occasional, low-frequency, one-time or no desire to freeze TRX resource requirement scenarios.

Below are several typical examples to help you understand when to use “Quick Rental.”

Example 1: Occasionally Transferring USDT (TRC20) but No Energy Available

Users rarely transfer on TRON normally.
When needing to transfer USDT that day, they find their address has no energy, and transaction fees would directly burn a large amount of TRX.

👉 Use Quick Rental to purchase short-term energy (e.g., 10 minutes), complete the transfer immediately with lower cost.

Example 2: Using DApp, Needing to Temporarily Execute Smart Contracts

Users occasionally open a DApp and need to participate in contract operations such as staking, exchanging, etc.
But the address has no energy and cannot execute.

👉 Use Quick Rental to temporarily replenish energy → Execute contract operations immediately.

Example 3: Temporarily Needing Batch Transfers (Airdrops / Red Packets / Rebates)

Merchants, agents, or project parties occasionally need to execute a large number of transfers within a short time.

👉 Purchase a large amount of energy for a short time through Quick Rental,
Complete airdrops and transfers in batches, avoiding excessive TRX transaction fees.

Summary

If you use energy infrequently or have temporary energy usage needs, Quick Rental is suitable for you.

​
Quick Rental Operation Guide

Quick Rental is suitable for temporary, occasional TRON network operations, such as transferring USDT, DApp interactions, etc.
Through the following steps, you can quickly lease energy or bandwidth for your address, achieving “immediate usage upon rental.”

The operation流程 for energy and bandwidth is the same. The following will use energy rental as an example. You can choose to rent energy or bandwidth according to your actual needs.

Page Entry:
👉 GasStation Quick Rental Page

​
Step 1: Connect Wallet

  1. Open the Quick Rental page
  2. Click 「Connect Wallet」 Currently supports TronLink/OKX (TronLink by default) After connecting, the system will read your address resource status, as well as TRX address balance and account balance.

Why Connect Wallet?
After connecting the wallet, the system will create an account for you and obtain your asset balance and resource information (wallet address balance, account balance, available energy/total energy, available bandwidth/total bandwidth). You can use wallet address balance for payment or recharge the account using the wallet.

​
Step 2: Choose Rental Energy Based on Transfer Frequency

Select the energy value you need to lease in the “Resource Quantity” input box. Or directly fill in your estimated frequency based on the estimated number of times. The system will automatically provide you with specific energy recommendations.

The system now supports large-value orders. If you rent a large amount of energy at one time, the system may automatically split the order for you. This does not require manual operation. After splitting, each order will be delegated to you sequentially, and the delegation time for each order may vary slightly.

Selection Reference Method: (Energy consumption may vary slightly between different tokens)

  • 1 USDT(TRC20) Transfer
    ⚡ Generally requires about 64,400 Energy (If the receiving address does not have USDT, the first transfer generally requires about 130,400 Energy)

  • 1 SunSwap Token Swap (USDT to USDD Exchange)
    ⚡ Generally requires about 238,433 Energy (Different contracts may have significant differences in energy consumption due to complexity and rules. Please refer to the contract rules you ultimately execute.)

Why Estimate Frequency?
Each transfer or contract call consumes energy. The system estimates how many transfers the current energy amount can support for you, avoiding repeated orders due to insufficient energy and ensuring transactions won’t fail.

​
Step 3: Choose Rental Duration (Very Important)

The system supports multiple lease periods: such as 10 minutes, 1 hour, 3 hours, 4 hours, 1 day, 30 days, etc. (Time periods may be adjusted according to actual conditions. Please refer to the actual time displayed by the system.) The longer the time, the relatively higher the cost. Choosing the duration according to actual needs can maximize resource utilization.

  • Temporarily transfer once → 10 minutes is sufficient
  • Expecting multiple operations → 1 hour is more reliable
  • It is recommended to reasonably choose the time according to your business needs

Why Choose Duration?
Leased resources are valid during the lease period.
The longer the duration, the longer resources remain available, allowing you to execute transactions at any time without transaction failure due to exceeding the rental time.

​
Step 4: Fill in the Address Receiving Resources

Fill in the address needing resources in the “Target Address” input box. After connecting the wallet, the system will automatically fill in your wallet address.

Batch ordering for multiple addresses is now supported. When entering, separate each address with a carriage return. The system will automatically delegate energy/bandwidth for each address (if there are too many addresses needing activation for the first time, activation may take some time, please be patient and wait.)

Under normal circumstances:

  • If you are renting for your own address → Fill in your own address (the system will automatically fill in the wallet address you connected)
  • If you need to rent resources for others → You can fill in the other party’s address

⚠ Note
Once resources are delegated, they cannot be transferred to other addresses or stopped midway. Please ensure correct filling.

Before submitting the order, it is recommended to turn on the 「Auto-Activation」 switch.

Why Enable:

In the TRON network, a new address needs to be “activated” before first use, meaning confirming to the blockchain that this address is normally used.

You can enable the auto-activation function:

1.After enabling, the platform will automatically check if your address is activated;

2.If not yet activated, the platform will automatically transfer 0.000001 TRX to the address to help you complete activation;

3.After successful activation, the platform will automatically delegate resources for you, requiring no action from you.

Activation consumes 1.1 TRX network fee, which is charged by the blockchain, with no additional platform fees.

Activation is one-time. Once activated, the address remains valid afterwards with no repeated charges.

Simply put:
Enabling auto-activation = The system prepares your address for you → No additional operations needed from you.

If there are many addresses needing activation at one time, activation may take some time, please be patient and wait. If your address is not activated and you have not used the auto-activation function, the system will not delegate relevant resources to your address by default (because unactivated addresses cannot receive energy/bandwidth).

​
Step 6: Confirm and Pay

  1. Confirm resource quantity, lease period, and receiving address are correct. Choose payment method.

  2. You can choose wallet address balance or account balance for payment. Click the 「Purchase」 button, which will deduct from your account balance. Choosing account balance payment is safer and more convenient, and also supports creating automatic rental orders. It is recommended to prioritize account balance payment.

  3. If your account balance is insufficient, you should recharge (TRX) 1-You can recharge by scanning the QR code.

2-You can also recharge by copying the address.

3-Or click to directly use wallet quick recharge.

After completing this payment:

  • Resources will be delegated and arrive within seconds
  • Your address can immediately execute transfers or contract operations

What Can You Do Immediately After Rental Completion?

  • Transfer USDT (TRC20)
  • Execute DApp operations (staking, exchanging, synthesizing, etc.)
  • Execute several transactions in batches

Your orders can be viewed at the bottom of the page Click on the agency details of the corresponding order to view the details of this order.